PROJECT  'sin_U_30'  '01'

	SET MAXERR=2
	SET LEVEL 0.0
	SET DEPMIN 0.05
	SET froudmax 0.002

	!this was required to ignore the level:2 error number of cells around vertex is smaller than 4 or larger 	 !than 10

	MODE NONSTATIONARY TWODIMENSIONAL

	COORDINATES SPHERICAL CCM

	CGRID UNSTRUCTURED CIRCLE MDC=36 FLOW=0.031384 MSC=45

	READGRID UNSTRUCTURED ADCIRC 

	INPGRID WIND UNSTRUCTURED EXCEPTION 0. NONSTAT  20191113.010000  3600 SEC  20191114.120000

	READINP WIND 1 'SWAN_const_U_30.22' 

	!WIND 10 270

	!constant wind of 10 m/s at 270 actually means from 0 deg or north 

	!INITIAL ZERO

	GEN3 KOMEN AGROW
	WCAP KOMEN 2.36E-5 3.02E-3 2.0 1.0 1.0
	BREAKING 
	FRICTION JONSWAP CONSTANT CFJON=0.038
				!0.038 is default
	OFF REF 
	PROP BSBT
	TRIad itriad=1 trfac=0.8 cutfr=2.5 urcrit=0.2 urslim=0.01

	NUM STOPC DABS=0.005 DREL=0.01 CURVAT=0.005 NPNTS=95 STAT MXITST=50

	POINTS 'loc' FILE 'lat_lon_swan.txt'

	!this reads the points [xp][yp] or [lon][lat] for which to write results
	!idk what 'loc' is but it came from ex.2 and seems to work

	QUANTITY HSIGN 'short'

	!requesting quantity of significant wave height

	OUTPUT OPTIONS TABlE 16   

	TABLE 'loc' NOHEADER 'SWAN_sin_U_30_Hs_STAT.txt' HSIGN  OUTPUT  20191113.010000 3600 SEC

 	!Indicates that for each location of the output location set 'sname' (see commands POINTS, CURVE, FRAME 	!or GROUP) one or more variables should be written to a file.
	!Should write values of Hs at points from 'lat_lon_swan.txt' to SWAN_time_varying_01.txt
	!If no OUTPUT is specified for time, it will output for last time step

	TEST 1,0
	COMPUTE NONSTAT 20191113.010000  600 SEC  20191114.120000
	
	!COMPUTE  STATIONARY 20191113.010000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.020000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.030000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.030000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.040000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.050000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.060000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.070000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.080000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.090000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.100000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.110000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.120000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.130000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.140000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.150000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.160000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.170000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.180000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.190000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.200000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.210000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.220000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191113.230000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.000000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.010000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.020000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.030000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.040000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.050000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.060000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.070000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.080000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.090000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.100000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.110000 
	!INIT ZERO
	!COMPUTE  STATIONARY 20191114.120000 

	!this command orders swan to start the computation. in stationary mode do not specify any options 

	STOP